Assistive listening for churches: understand the sermon, even in the back pew.
The Auracast™ system brings sermon, readings and singing straight to the hearing aid or loan receiver. For an accessible church, with no cable in the floor and no changes to the church interior.
Why it is so hard to understand in church
Churches are tall, made of stone and full of reverberation. The voice from the lectern reaches the back pews late and blurred. Hearing aids do not help much: they amplify the echo too.
An assistive listening system picks up the voice right at the microphone and sends it into the ear, past the room. It sounds as if the minister were standing right beside you.
From the lectern to the ear
The system uses the microphones and sound system you already have.
Microphone at lectern and altar
The signal comes from the church's existing sound system.
Auracast transmitter
The Summitwave TX sits in the sacristy or by the mixer and broadcasts to the whole church.
Hearing aid or loan receiver
Auracast hearing aids receive directly. Everyone else picks up a loan receiver with headphones or a neckloop at the entrance.
In practice
Christuskirche Innsbruck
The Protestant parish first tested the system during services and then installed it permanently. The transmitter is connected to the existing sound system, and the congregation listens with their own Auracast hearing aids or with the loan receiver.
“I lean back and someone whispers in my ear.”
Maria Kalcsics, curator of the Christuskirche Innsbruck, listens with her hearing aids via Auracast
What a church needs
One transmitter is enough for most church interiors.
One transmitter per church
Connected to the sound system and powered over the network cable. Typically covers the whole church; a measurement on site settles large spaces.
Loan receivers at the entrance
In sets of four with a charging station. With headphones or a neckloop for telecoil hearing aids. Just switch on.
Sign with a QR code
Anyone with an Auracast hearing aid scans the code at the entrance and is connected. Create the sign with the QR tool.
No changes to the building
No loop in the floor, no channels in walls or screed. That protects listed churches.

And the existing induction loop?
Many churches have an induction loop (also called a hearing loop). Auracast replaces it: new hearing aids receive Auracast directly, and guests with a telecoil listen via the loan receiver with a neckloop.
An existing loop can continue to be used in parallel. The transmitter connects to the same sound system.
Frequently asked questions from parishes
What ministers, sextons and committees want to know before deciding.
Hearing aids and cochlear implants with Auracast receive directly. The device findershows whether yours does. With a telecoil you listen via the loan receiver with a neckloop.
No. The loan receiver just needs switching on. With their own Auracast hearing aid, the QR code at the entrance or the hearing aid maker's app is usually enough.
Nobody. The transmitter runs with the sound system. The sexton or welcome team hands out loan receivers at the entrance and puts them back in the charging station afterwards.
Yes, everything that runs through the sound system. Whatever does not come through a microphone, such as the organ, is easy to hear in the room anyway.
Typically 40 ms.
Yes, with a second transmitter or with the mobile transmitter you take along as needed. The loan receivers work in both rooms.
Try the system during a service
We send you a Summitwave TX and a set of loan receivers. You connect the transmitter to your sound system and your congregation tests it on Sunday. Free of charge.
