Skip to Content

How Auracast QR codes select a broadcast

The code transmits selection data – the sound is received by the hearing aid or headphones directly from the transmitter.
26 September 2026 by
Malte Heuer

An Auracast™ QR code does not contain an audio stream. It transmits data that allows a compatible assistant to find and select the correct broadcast. The sound is then received directly from the transmitter by the hearing aid, headphones, or another Auracast receiver.

The QR code thus shortens the search. However, it is neither a Bluetooth receiver nor a guarantee that the devices involved will work together.

What does an Auracast QR code contain?

The Bluetooth SIG defines the Broadcast Audio URI. It begins with BLUETOOTH: and can contain multiple fields. The following details are particularly relevant in practice:

  • BN – the readable name of the broadcast
  • BI – the broadcast ID
  • AT and AD – address type and device address
  • BC – the access code of an encrypted broadcast

Other fields may, for example, select a specific audio stream or a language. The QR code is therefore a set of selection data, not a link to an audio file. Bluetooth SIG: Broadcast Audio URI 1.0

A field being present does not make it mandatory. The broadcast ID has a conditional requirement: it must be present in the code if it is static or if the medium used can dynamically display its current value. In other cases, it may be absent. Therefore, neither "The ID is always mandatory" nor "The name is always sufficient" is technically correct.

What happens after the scan?

In Auracast, there are three roles. The transmitter broadcasts the audio. The receiver plays it back. The assistant helps with searching and selecting. A smartphone can take on this assistant role without forwarding the audio itself. Bluetooth SIG: How Auracast works

Technically, three steps can be distinguished:

  1. A camera or app reads the URI from the QR code.
  2. The assistant searches for the appropriate broadcast and passes its data to the receiver.
  3. The receiver synchronises with the transmitter and plays back the selected stream.

The Bluetooth Audio Scan Service describes, among other things, the “Add Source” operation for this process. It requires the actual broadcast ID. If the ID is missing from the QR code, an assistant can fill it in from the broadcasts it receives. Bluetooth SIG: BASS 1.0.1, Table 3.5

This is exactly what a reviewed Android 17 source snapshot does: if the QR data has no ID, the software compares the broadcast name with the sources it has found. If they match exactly, it takes over that source’s ID. This is a source code finding, not a guarantee for every Android device or operating system version. Android Open Source Project: handleSourceFound and maybeUpdateId

Why “QR code scanned” does not mean “Audio connected”

A camera can correctly recognise the pattern, even though it cannot make use of the included Bluetooth URI. An assistant can accept the data, even if the transmitter is out of range or switched off. And a receiver can find the broadcast, but fail at the chosen language stream or access code.

The entry point also varies depending on the system. Google describes a camera workflow with a connected LE Audio receiver. Phonak uses a QR scanner within its own app. Both methods are documented, but they say nothing general about other cameras, apps or QR variants. Google Pixel Help, Phonak Help

The basic signal path is explained in “Is Auracast Bluetooth?”. Why a smartphone is not necessarily involved in the audio path is addressed in “Does my smartphone need to support Auracast?”.

What operators should check

Always test the complete path from the printed or displayed code to the audible sound. Document the phone model, app, operating system, receiver, and firmware. Repeat the attempt after restarting the transmitter and check each language channel individually.

With a printed QR code, the information contained must remain valid in the long term. Values that change belong on a dynamic display or should be filled in by the assistant from its radio scan. If the code contains a broadcast access code, its Base64 representation is not encryption. Whoever receives the QR code also receives the access data.

On the sign, describe the exact steps you have actually tested. "Scan with the camera" is only a good instruction if this exact process has worked with the intended devices.

Conclusion

An Auracast QR code simplifies the selection of a broadcast. It carries identifiers and optional access data, but no audio. Access only becomes reliable once the QR content, assistant, available broadcasts and receiver have been tested together.

For operators

Auracast with a QR code at your venue?

With the free Summitwave QR tool, you can create the code for your broadcast. Summitwave provides the transmitter and loan receivers for guests without suitable devices.

Book a free demoOpen the QR tool

Sources

Sources as of 20 September 2026.

Malte Heuer 26 September 2026
Share this post
Archive